D1 Coating Thickness Meter With Offset Probes

The SALUTRON Coating Thickness Meter model D1, allows to accurately measure all non-ferrous coatings, either on magnetic support (substrate) with Fe probe (magnetic induction), or on magnetic support (substrate) with NFe probe (eddy current)

• The Fe OR NFe Probe is connected to the housing by cable

Key Features:

• Measuring principle Magnetic induction and eddy current
• Substrate Ferrous or non-ferrous
• Measuring capacity 0 – 2 mm 0 – 0.8 mm
• Resolution:
  -0.1 μm from 0 to 99.9 μm
  -1 μm from 100 to 999 μm
  -10 μm from 1 to 2 mm
  -0.1 μm from 0 to 99.9 μm
  -1 μm from 100 to 800 μm
• Accuracy 2% 1.5 μm
• Minimum surface 10 x 10 mm
• Minimum substrate thickness 0.2 mm 0.05 mm
• IP 65 protection
• Operating temperature 0 to 60°C
• Power supply 2 batteries 1.5 Volts
• Dimensions 120 x 65 x 22 mm – Weight 150 g

Delivered in box with:

• D1 housing with separate probe(s)
• 1 plate zero point, 2 batteries 1.5 V,
• instructions for use.