ABSOLUTE” digital calipers – Series 307

Features : 

– Display resolution: 0.005”/0.01mm

– The PAC is ready to measure as soon as it is switched on, with the LCD display showing the actual position relative to zero. There’s no need to zero each time the PAC is used, as the origin and settings are retained even when the PAC is switched off.

– The ZERO/ABS button changes the measurement mode from ABSOLUTE to INCREMENTAL. This mode is useful if a provisional origin is required, to define the nominal value as the new ZERO, in the case of serial measurements.

– By pressing the Zero/ABS button, the displayed value will change to the ORIGINAL ZERO point (usually with the nozzles in closed position) and the measurement mode will be displayed.

– Inch/mm conversion

– Data output

Standard accessories

– CR2032 battery (3.0V)

– Warranty card, factory calibration certificate, operating instructions.

– Packaging : Plastic case

– Wooden case for 0 – 300